This is a tutorial for a standard US fitted crib sheet that will fit a 28" x 52" crib mattress.
- 2 yards of fabric 44/45” wide
- 2 yards of 1/4” elastic
- 2 safety pins
- Wonder Clips
- Ruler larger than 8” square or a piece of paper cut to 8” square
1. Cut fabric to 68” long. Leave the 44/45” intact with the selvage on.
2. Fold the fabric so that all 4 outer corners are on top of each other. Place the ruler to measure an 8” square. Mark both sides with a pen & then cut with scissors. I suggest cutting with scissors for this step instead of using a rotary cutter so you don’t accidentally cut too far into the fabric at the inside corner.
3. Start with one corner and match up the pieces, wrong sides together. Pin fabrics together. (I know this seems backwards, but it is how we will hide all the raw edges.) Sew with a scant 1/4” seam. Backstitch at the beginning and end of the seam. Trim any loose threads.
4. Press the seam to one side.
5. Now fold the corner seam fabrics right sides together to encase the original seam. Pin the fabrics together and sew a 3/8” seam. Backstitch at the beginning and end of this seam.
6. Repeat steps 3-5 with remaining 3 corners.
7. Now we need to create a casing to house the elastic. Fold up 1/4" and then 1/2" and finger press followed by clipping in place with Wonder Clips. You could press with an iron here, but perfection in this step isn't needed and I like to save time, so you can just skip pressing with an iron and clip this in place.
|Fold 1/4" up and finger press|
|Fold additional 1/2" up and finger press|
|Clip in place|
9. Create the casing by sewing just inside the top edge of the fold and removing clips as you go. Backstitch at the beginning and end of this seam. Leave a 2" opening in the casing to thread the elastic through.
11. Use the safety pin to thread the elastic through the casing. Make sure you go in the same direction as the corner seams so that you don't get caught at the corners. (I had that problem too...)
14. Pull & Push the remaining elastic into the casing by easing it around the entire sheet.
© Blog post written by Julie Herman
For more information visit http://www.jaybirdquilts.com/
I have a lovely set of queen sized sheets that needs to be re-elasticized. Thanks for the tips for us big people, too.
And Robby, that just sparked an idea. I have sheet for beds I no longer have so using those sheets and Julie’s “How-to” I can resize them for baby use.
Love the sheet tutorial. I made sheets for my kids, many years ago. If you don't want to fiddle with the elastic, you can use the corner cut outs. Just fold them in half diagonally, right side out, and sew them in the corner of the bottom of the sheet. Do this for all 4 corners. The folded edge of the triangle stretches across from side to side and holds the sheet down very well on a standard crib mattress.
This is a wonderful idea!! Thanks so much :)
So easy and fun! I think Step 5 is supposed to say fold the corner seam fabrics RIGHT side together :)
#5 is correct, by sewing the corners with wrong sides together, when the seam is turned in and sewn makes a nice covered seam. I have made multiple sheets, both with raw edges and with french seams. The French seams are much nicer.
I made a flannel crib sheet yesterday and it came out great! It matches the quilt I made.
Your pattern was easy to follow! Thanks!
Such a great tutorial. I love adding unexpected handmades to my baby gift repertoire.
I hate to be the dense one here, but are the cut-out corners re-attached? Or are they discarded for another project? I can't figure it out from the pictures, trying to understand pics #7, 8 and 9. If they are re-attached, is the corner rounded in any way?
My grandson is due in February! I have some flannel to make sheets. Thanks for this awesome tutorial!
Just finishing up a sheet and pillow set for my grandson who is 2 and just got his bed down to the big boy set up! He will love his new set Grammy made! Thank you Julie!
Post a Comment